The original flower pot with their hands

Materials:

- A small tin pail;

- A mixture of plaster for interior use;

- Mounting grid;

- Marine pebbles;

- A mixture of grout.

Instructions:

1. Take a small tin pail. Make the bottom of the bucket hole to drain excess fluid.

2. Apply the base (in this case, use ready-made mortar for interior) with a spatula. First, on the one hand. The basis is not applied with a thin and a thick layer of approximately 0.4-0.6 mm.

3. On the basis of put mounting grid. Vdavivaem it a little to the mix. So we will go to the stones evenly across the surface.

4. Start laying sea pebbles.

5. We reserve the bucket to dry.

6. Fill the mixture for grouting holes between the stones. Excess mixture after drying wash off sponge dipped in water.

7. Enjoy the results!

Stylish and creative shutters

Bright bathroom design

          NOT INTENDED BUT usefully

1. Shampoo

It has proven itself as a bubble bath.

Excellent wash delicate clothing, if there is no special powder (except that then you need a very long time to rinse).

2. Hair balm

Magnificent as shaving gels, especially - female.

3. Cream for the face or body

Better than you can imagine for cleaning shoes and any leather products.

Protects hands under the gloves in the cold autumn and winter, icy, softens heel for warm socks.

It moisturizes the hair ends, victims of chemical paint, hot sun or the bitter cold - just put on mochalistye tips evenly distributed.

4. Make-up Remover Lotion

Copes with signs tonalnika or lipstick on outerwear.

Easily cleans traces of hair dye on the forehead and behind the ears.

5. After Shave Gel

Apply on the pimple: cures and dries.

6. Eau de Toilette

Put ajar in the closet where you store off-season items, shoes, towels, bed linen.

Aromatiziruem bookcases.

7. Chapstick

Simulate drawing eyebrows.

Softens dry cuticles at home manicure.

      8 reasons to use fiberglass for walls

Today there are many different materials that are perfectly suited for wall decoration. This man always tries to give priority to high-quality products that can boast of its ecological compatibility and durability. In this respect, one of the best finishing materials are fiberglass. This article will try to list all the benefits of their use in a modern interior.

Reason №1. Environmentally friendly

Glass fiber made entirely of environmentally friendly natural materials. Achieved product of a glass fiber, based on the dolomite, limestone and quartz sand. During manufacture the glass acquires flexibility and increased durability. The absence of toxic elements in the glass fiber can be used even for finishing such an important room as a children's room.

Reason №2. Fire safety

In modern conditions, when safety is above all one of the main criteria when choosing a finishing material is resistant to open flames. In this regard, to steklooboyami no complaints - they do not burn, and upon exposure to elevated temperatures, do not emit any harmful substances.

Reason №3. Hypoallergenic and hygienic

This is a very important advantages fiberglass, because they do not accumulate static electricity. And most importantly, they do not "stick" the dust.

Reason №4. The air permeability and moisture

Glass wall in an interior bathroom

Glass wall can "breathe", which allows their use in high humidity areas. Few materials can boast of such an advantage. Excellent breathability reduces the likelihood of mold and mildew on the walls to a minimum, and the humidity is a guarantee that the wallpaper will not flake and peel off under the influence of moisture.

Reason №5. The ability to realize any fantasy

Glass fiber - great finish for painting. These products may be coated with any kind of paint - latex, acrylic or latex. With fiberglass, you can "play" with the texture of the walls, change the pattern and color. To make the interior depth, you can use matte paint. To emphasize the texture of glossy paint will help.

Finishing material can be painted in a variety of colors, and even apply a stencil pattern. If you want to keep the tissue structure, it is sufficient to treat the fiberglass special transparent varnish.

Reason №6. Strength

Of the material is very durable and resistant to various cleaning agents. This means that the glass fiber can be cleaned if necessary. But this feature only applies to high-quality materials, so saving is not recommended. It is recommended to buy only proven fiberglass manufacturers.

Reason №7. It can be applied to various surfaces

The advantages include ease of fiberglass gluing. They can be used for decorating domestic and industrial premises. In addition, the material can be repeatedly applied layers of paint (25-30 times). If necessary, you can hang steklooboyami any furniture. This bag of tricks is very useful when you want to hide unsightly wardrobe in a nice interior.

Reason №8. Easy pasting wall

Glass fiber is very easy to glue on the ceilings, doors, and, of course, walls. However, no intricate requirements for the application does not exist. It is enough to cover the wall of a colorless primer, and only to smear the walls, which must be clean and smooth.

conclusions

Thus, glass - this is an excellent choice for demanding people, who know the value of quality products for interior decoration.

               Choose a floor covering

Flooring is an important component of the complex repair. Today, the most urgent decisions are linoleum, laminate and parquet. Each type of coverage has its advantages and disadvantages, so the choice depends on personal preference and the planned budget.

Laminate flooring - modern and high-quality building material, which allows you to quickly and reliably arrange the floor in commercial premises and in the living room. Laminate board has excellent performance: it is resistant to mechanical deformation, easy to clean, very tolerant of load, if necessary, dismantled and re-installed. If done correctly, the installation of such a floor, not only looks great, but also provides good sound insulation.

According to the intensity of use laminate is divided into two groups: commercial and residential premises. Within each category there is a division in the model with a different degree of wear resistance. To view the range of laminated boards, you can click on the link, a wide range of decor and textures allows you to choose the design for any type of interior.

The design is dominated by the texture of wood or imitation stone, thanks to modern technology the appearance of the floor, made of laminate retains its appeal during the whole period of operation.

The upper level of the laminate is a layer of acrylic or melamine resin, it protects the surface from chips, scratches, mechanical damage, prevents the penetration of moisture inside. The base layer is composed of high-quality particle board, it provides the strength and reliability of the entire structure, namely the thickness of this layer depend insulating properties floor. It also affects the ability of the coating to protect the premises from unnecessary noise.

The bottom layer is the impregnation of the polymer resin, it protects the board from the influence of moisture, it provides little mobility, which compensates for any slight unevenness in the floor.

As laminate flooring has excellent hygienic characteristics: it does not emit harmful substances, fireproof, easy to clean, hypoallergenic, and its surface is perfect for people who care about their health. The material is resistant to rot, is not exposed to mold, it does not emit odors.

                   Sawdust, as a heater

Many people have their own suburban house because of its warming issue is always topical. Particularly acute, this problem arises with the onset of winter. So that winter does not bring disappointment in housing need in the warm worry about home insulation.

So for insulation you can use various thermal insulation, but most are a cheap chips (wood waste).

Sawdust, as a thermal insulator, used everywhere today. But do it right is not so easy as it seems at first glance. Sawdust can find in any wood processing enterprises. Before the introduction of chips, they should not soak scented varnish. This is done in order to have at home not settle in the mouse, because the smell repels them, with this method even more effective everyday rat poison.

After impregnation, the chips they need to dry because wet sawdust will rot inside your home that will bring great difficulties. The time needed for drying sawdust, can be carried out with the utility. For example, you can start preparing the walls or the floor (that part of the structure that you want to warm) to the insulation. For the preparation of the floor must be removed flooring (when working with the floor) and throw a "naked" walls with insulation walls.

If you just need a floor insulation layer rovnenko sprinkle sawdust height of approximately 5 cm. Even more time consuming insulation walls. In this case, it will be necessary plywood, sawdust and close to a lot of patience to correctly fill chips, because they can sleep out of plywood. But it is best to house warming conduct in full (floor, ceiling, walls) because the insulation of the 1st element will give a huge effect.