Useful tips to repair their own hands:

- To reduce the number of fallen to the floor of ink droplets, it is necessary to attach the bottom tray of small cans (plastic plate, cardboard). Stick a tray can be double-sided tape or glue.

- To allow any paint on the edge of the banks do not drip on the floor for it before painting, pierce a few holes in the banks ledges. When there is a cluster of paint, it starts to flow into the hole you made.

- In some circumstances, it happens that when painting in the jar gets the trash and thus paint becomes unsuitable. To avoid such troubles, before the repair work with their hands, cut out of a metal mesh (with a small cross section) circle, slightly less than the diameter of the inlet of the banks. If debris gets into the paint, just push it to the bottom of the grid, and banks continue to repair.

- If you need to stop the process of painting a period of not more than a day, the equipment (brushes, rollers) is not necessary to clean, you can just put it in a container with water.

- If you have cleaned the tool (brush, roller) and the plan to remove it until the next repair, for a long time, you should be aware that the storage of brushes in any case do not put them on the bristles, and the roller is wrapped in foil or polyethylene.

- When planning the paint work, please note that under normal circumstances, a person will be able to paint with a brush of about 11 m. Square smooth surface, 9 m. The untreated wood (concrete), 6 m. Brick.

The sequence of repair of an apartment with his hands:

Ceiling
Walls
Paul

- Remove the old whitewash from the ceiling, it will be easier if it is well to moisten it with water (with a cloth or spray). After all is smooth whitewash dark tone, you are ready to remove it.

- Old latex paint is removed from the surface by rinsing with water (rags, brushes, etc.).

- Preparation of the mix for whitewashing should not experience the color by drawing on cardboard or plastic - the colors will be different. Better, in this case, the sample composition to the intended surface to be painted.

- In order to simplify your work as you move around the room heavy furniture, place under her feet wet bar of soap or a potato cut in half.

- Return old linoleum seasoned luster and gloss can be by rubbing it with mastic for flooring, furniture polishes and varnishes. Put any of these mixtures on the linoleum and after they dry, rub the linoleum soft, dry cloth. Such treatment should be no more than 2 times per month.

- When placing linoleum, it should be remembered that it is necessary to glue in the middle, so that in the future could be expelled from coverage under the excess air.

- When repairing the walls or the floor, it is best to remove the baseboard. So you easily then close the defect repair on wall and ceiling joints.

- Tile on the wall, will hold much stronger if sticking it to the oil-based paint.

- In order that would prevent the emergence and development of mildew fungus on the walls around pipes, toilets and kitchens, always wrap the pipe raw material strips and color them.

- If the glass over time become dull and muddy, rinse them with water and ammonia.

- For a simple cut glass roller glass cutter in obmoknite kerosene.

- In order to at painting window frames, no stained glass, lubricate it with vinegar or vegetable fat.

- Nailed in the wrong place it will be much easier if you attach it to the surface with the help of clay or putty.

- When selecting materials for the repair, remember that their colors will be very different in the light of their home.

- For the uniform application of lacquer on the surface, you can use the following trick. Obmoknite a brush in paint and make a smear 1-2. The rest of the work on implementing the second spreadability varnish brush.

- In the presence of defects on the wallpaper, it is not necessary to hurry up and change all the wallpaper in the room. You can take the remaining piece of wallpaper and cut out of it, under the appropriate section of drawing.

- Old wallpaper can be easily removed, if they are wet with water. Best of all wallpapers are wetted when applying water sponge rubber. If the wallpaper is glued too tightly, it will help to remove them horizontal cuts.

- Air bubbles left on the wallpaper after bonding, can be removed by proglazhivaniya still wet, just pasted wallpaper iron, as well as making a neat vertical cuts.